Centeron Wireless Tank Monitoring System

Centeron Alarm Monitors sense fluid level and immediately transmit an alarm signal when a set point level is reached. The Dual Input High Level Alarm Monitor is specifically designed to provide two alarms for added protection against overfills. Use it with the Centeron Alarm Console to generate an immediate audible and visual alarm, or to automatically shut down the dispensing pump. Just reset the console after the first alarm and the monitor will transmit again when the second limit is reached to re-activate the alarm. The monitor also communicates with any standard Centeron Controller so the alarm status can be accessed at any remote location with Internet access.

Features:

• Completely wireless and battery powered
• No calibration required
• Monitor transmits immediately whenever a switch event occurs
• Monitor transmits at a regular interval to validate operation
• Suitable for fuels and lubricants. Float assemblies for additional fluids are available
• Magnetically mounted monitor for easy installation

• Temperature range: -40° C to + 80° C
• UL 50 Type 3 environmentally sealed enclosure
• 5-year battery life 4 hour transmit interval
• Radio range: 1-mile line of sight, 500 ft. obstructed
• Radio complies with FCC Part 15
• ETL/cETL listed: Intrinsically Safe for Class I, Division 1,

The Centeron System

We start with the monitor. It’s wireless, so no special know-how or tools are needed to install it. It’s powerful, too. Our DSSS radio technology is far superior to the narrow bandwidth radios found Dual Input in other wireless systems. That means the alarm signal gets through even in the harshest environments.

The alarm monitor sends its message to the Centeron Alarm Console to sound a local warning for delivery personnel. Or, the message can also be sent to a Centeron Controller for posting on the Centeron Data Center. From there, an e-mail, text message or fax can be sent to alert you wherever you are.

Just think what that means to your business. You can eliminate the fear of costly overfills or undetected leaks. Eliminate manual monitoring of your tanks during every fill. Eliminate the need for manual leak inspections. Let Centeron do it for you 24/7. Centeron puts you in control so you can manage your business better.

ETL/cETL Marked Intrinsically Safe apparatus for use in Class I, Division 1, Group D hazardous locations, conforming to ANSI/UL913 and CAN/CSA C22.2 No. 157.

FCC Part 15 Registered: NU9TX0669-0110

This device is manufactured by Robertshaw Controls Company, in Maryville, TN USA under the following US Patents: 4,977,577; 5,067,136; 5,119,396; 5,265,120; 5,406,217; 5,547,713; 4,581,606; Patents pending in the US and other countries.